- OEM MFG
- Order Express
- OEM/Competitive Interchange
- Technical Information
The Monobolt® System
Blind Installation: The single side installation feature of the Auveco Monobolt System allows one operator to produce high quality structural joints in seconds. Use of the Monobolt power tool does not require special skill or training, because the tool completely controls the installation cycle.
MultiGrip: One size Monobolt fastener will function effectively in a wide range of material thicknesses (Example: .080"to .375"). This versatility decreases the potential for production errors and reduces fastener inventory requirements.
Uniform Clamping Action: Monobolt fasteners are engineered to draw materials together by developing positive clamping action.
Structural Fastening: An installed Monobolt fastener yields high shear and tensile values. Conventional fasteners can be replaced by Monobolt without compromising structural requirements.
Positive Stem Retention: At the completion of the installation cycle, the stem is mechanically locked into the Monobolt shell, creating a vibration-proof joint of assured structural quality.
Flush Break Stem: Within the specific grip range for each size, Monobolt fastener, the stem is designed to break flush with the low profile head. Secondary finishing operations, such as grinding or milling, are not necessary to achieve good product appearance.
Complete Hole Fill: During installation the Monobolt shell expands into 360°contact with the walls of the parent material. This feature, in conjunction with positive stem retention, produces weather resistant joints.
Quiet, Safe Installation: The Monobolt System, operating at 85db (“A”Weighted), complies with OSHA regulation governing plant noise level and operator safety.
How it Works
|1. The Monobolt fastener is loaded into the nose of the |
placing tool and inserted in a prepared hole. As the tool
is actuated, the pulling jaws grip the Monobolt stem.
| 2. An axial pull draws the stem through the shell, |
expanding it radially. During this phase, the hole is
completely filled and work pieces are drawn together.
| 3. When the stem reaches a pre-determined position |
within the Monobolt shell, it separates flush with the
head profile regardless of work piece thickness.
Simultaneously, the stem section remaining in the shell
is mechanically locked in place by the Monobolt tool.